How To Fix Sliding Closet Doors

The first thing to check is what type of rail system your sliding closet door uses in order for it to slide.

How to fix sliding closet doors.

How to fix sliding closet doors. Step 4 tighten the overhead track. Locate the two adjusting screws at the bottom of the door on the face or edge of the door and pry off the trim caps that cover the screws. Unlike entry doors sliding closet doors rarely have a bottom track.

Even if you have brackets on the bottom of your door they re probably just connected to your wheels. Close the door to check for smooth operation and to see how the doors meet. Loosen the screws at the top of both doors. Reinstalling sliding bypass doors the doors are usually interchangeable but you will want to start with the rear track.

Open the door and then loosen the setscrew for the top bracket slightly with a screwdriver. Step 3 fix dented track sections. See if the screws holding the guides down need tightening to be more secure. Open the door gently so the pivot doesn t slip then tighten the setscrew.

If your doors hang from a top rail and do not have a track on the floor then you need to either replace or tighten down the floor guides. Push or pull the top of the closed door to align its edge parallel to the frame. If the rollers are damaged install replacement rollers available at home centers. Use an aerosol lubricant to lubricate all the door rollers.

To fix this issue first try. To start your sliding glass door adjustment project first lift or lower the door on the track with a screwdriver or allen wrench. Raise it just enough to clear the track and roll smoothly. A dirty obstructed or damaged track can make a sliding closet door jump off its track.

Insert the door s wheels into the double track inside the upper door jamb lifting it as far as it will go. To clean and lubricate the hardware of a sliding closet door use a stiff brush a toothbrush or a hand vacuum to clean dust from the tracks. Step 5 replace. Step 1 clean the track.

Loosen every single screw to ensure that you don t miss one and crack your. Angle the bottom of the door toward you while you let it down and the wheels should hook right onto the track.